Utility Designation Prior To Cold Storage Unit Installation
understand what's underneath trademark trinity subsurface
Louis Mercado

Here in Bradenton FL, behind a Publix grocery store, Trinity was called to perform a full Utility Designation using Ground Penetrating Radar(GPR) and a variety of Electromagnetic Locating Devices for a client who was planning to install a new cold storage unit. Our client, an Architecture and Engineering firm, asked Trinity to designate all utilities within scope of work and determine depths of electric lines within scope. Trinity came to safely and accurately mark out all utility lines within the scope of work. There were many lines within the scope; those lines included communications, power, sanitary, gas, water, as well as grease traps. The client was satisfied with the timely communication, turnaround time, locate, and accuracy provided by Trinity ensuring the safety and quality for work to begin. The Electromagnetic Locating consisted of direct connection, clamping, andinduction using both the Radio Detection Transmitter and the Receiver. Grid patterns were also performed in Passive Modes with the EM Receiver,specifically to detect subsurface metallic conduit, copper wiring, and live electrical lines (60 Hz). GPR Scans were performed in a similar grid pattern,purely detecting changes in density and discovering anomalies that are nonconductive to EML. The purpose of this Utility Scan was to detect Electric lines, Communications lines Phone, Cable,FOC), Water lines, Gas lines, Sewer lines, and Force Mains. All findings marked with spray paint and flagged according to the UWPA Uniform Color Code with periodic,approximate depths. We performed a walk through with the Project Manager onsite before location designation began, as well as upon completion. We thoroughly enjoyed providing our services here in Bradenton Florida to ensure the safety and efficiency of all parties involved with this project, and we look forward to many more to come! At Trinity Subsurface, we can make sure any obstructions within the soils are found when performing an underground utility locate. Whether your project is to locate prior to directional boring, digging,potholing, or trenching, we will be able to locate all obstructions within all types of soils. These obstructions include water, gas, sewer, electric, fiber optic, and drain lines, irrigation, unknown pipes, and any other obstructions within the soil. We are also able to locate utilities that run directly below the concrete or asphalt. Using our state-of-the-art utility locating equipment,we can see up to 3-10 feet depending on the makeup of the soil and the moisture within it. We will use several different types of equipment including radiodetection, ground penetrating radar, sondes, split box, and several others depending on the project and what is needed to help you understand what’s underneath.  We can then provide a detailed written report for your project or just mark it out on the surface of the ground with paint, stakes, orpin flags. 

Our training program for underground utility locates is very thorough and one of the best in the industry. When our technicians are on site, you can rest easy knowing that they have the best training and equipment for your utility locating project. Maintaining the safety of your people and the subcontractors working on your project is the number one priority of Trinity Subsurface. 

Back to the Southeast Region